DINING CHAIR WITH CUSHION SEAT ASSEMBLY INSTRUCTIONS PAGE 1 OF 5
ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS : 1. Remove hardware from plastic and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly. Warning ! 1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishment.
ASSEMBLY INSTRUCTIONS STEP 1 Align and fasten upper leg frame (B) to lower leg frame (C) by using long wood bolt (4) and tighten with Allen wrench (1). 1 C B 4 STEP 2 Align and fasten cushion seat (E) to leg frame using long bolt (2) and tighten with Allen wrench (1).
ASSEMBLY INSTRUCTIONS STEP 3 Align and fasten wood cleat (D) to leg frame ( as per diagram shown) by using short bolt (5) and lock washer (6) and tighten with Allen wrench (1). D 6 5 D 1 STEP 4 Align and fasten back rest (A) to leg frame (as per diagram shown) by using short wood bolt (3) and tighten with Allen wrench (1).
ASSEMBLY INSTRUCTIONS STEP 5 Insert wood plug (7) to the open hole on leg frame as per diagram shown. 7 STEP 6 Complete.
