2131 Wing Coulter Chisel User Manual

3-36 F-721-0513 Edition
ASSEMBLY INSTRUCTIONS
Hydraulic Tubular Mount
Chopper Reel Installation
1. Install hydraulic chopper reels in the same manner
described for standard tubular mount chopper reels
(See “S tandard Tubular Mount Chopper Reel
Installation (Option)” on page 3-32.)
2. Install h ose mount plates onto rear tube o f frame and
wing frame using 6-11/16 x 5-1/2 x 5/8-11 u-bolts an d
flange head serrated nuts (See Figure 3-28.)
3. Install hose mount tubes to top of hose mount plates
using 2-3/4 x 4 x 5/8-11 u-bolts and flange head
serrated nuts.
4. Install 8 port manifold assembly to hose mount and
wing hose mount tubes using 1/2-13 x 4 hex head
cap screws and hex lock nuts. Orient manifold as
shown in Figures 3-26 and 3-27.
5. Install fittings and route hose s as sh own in Figures
3-26, 3-28, 3- 29 , an d 3-3 0 .
NOTE
On wings with three arms, the center arm will be a
standard spring setup.
Figure 3-30: Hose Routing Inside Chopper Reel Arm
HYDRAULIC TUBULAR
MOUNT CHOPPER
REEL ARM ASSEMBL Y
HOSES TO GO INSIDE
OF HARROW ARM
TUBE
45° ADAPTER
90° ADAPTER
chopper reel hose ro uti n g