User Manual

F-695 Edition Brillion Farm Equipment 1-3
rev01-04-13 Landoll Corporation
Relocate the scraper mounting strap on the left hand
wing for clearance on a P/N 171861 (new) center frame.
1. Using a grinder, cut off wheel or torch remove or trim
strap flush with tube located at the 12 5/8” dimension
2. Weld a new strap at the 16 5/8” dimension. See
Figure 1-2.
3. Touch up the effected area with Brillion paint.

WARNING
Figure 1-2
Failure to Trim the Strap flush will cause the
Scraper Bar to bend.
NEW LOCATION
OLD LOCATION
28”
12 5/8”
16 5/8”
28”
1”