User Manual

Chapter 4 - Extender Configuration in Command Center Landis+Gyr
38 98-1178 Rev AA Installation and User Guide
History Tab
The History Tab, shown in Figure 4 - 12, provides a list of the events and errors that have been
logged by this Extender.
Figure 4 - 12. Extender History tab
Remove Extender from Command Center
This function allows the user to remove a deployed Extender from service. The removed Extender
can either be put back into inventory or archived.
1. From Command Center, select Operations > Endpoints. The Endpoint/Meter Selection
window will open.
2. Enter the Extender serial number in the Endpoint field.
3. Click GO. The Available Tasks list will appear.
Figure 4 - 13. Endpoint Meter/Selection Available Tasks
4. From the Available Tasks, select the Remove Endpoint from Service link. The Remove
Endpoint From Service window will open.
DRAFT 5.14.2012