User Manual

Landis+Gyr Chapter 2 - Installation
Installation and User Guide 98-1178 Rev AA 21
Streetlight Arm Mount Installation
VERIFY this street light has power 24/7 and is NOT remotely switched.
Mount Extender to Streetlight Bracket
The following procedure details Extender installation on a standard steetlight arm. Ensure that
required tools and materials are on hand and available.
1. Attach the Extender to the streetlight mounting bracket.
A. Insert bolt (A), with a spring washer (B) and a flat washer (C) in the center hole of each side
of the Extender and align to the holes in the mounting bracket (D).
B. Tighten the screws with a torque of 45 in. lb.
C. Insert the connector of the AC power cable (E) into the AC power socket (F). Be sure to
push the connector all the way down until you feel a click which indicates the power cable is
fully engaged.
Figure 2 - 9. Mount to Streetlight Bracket
C
B
A
D
E
F
DRAFT 5.14.2012