User Manual

Landis+Gyr
Gridstream SCADA/DA S4SBR 98-2550 Rev AC 37
RF Antenna Specifications
An external antenna is connected to the board via an RF coaxial cable of the type as
shown in Figure A - 3.
Figure A - 3. RF Coaxial Cable
The cable has a Female R-SMA connector on one end and an U.FL Female connector
on the other. This cable is suppled in order to make the interconnect between the
radio card and the Coax cable leading to the external antenna , you will need to
make a R-SMA Male to N Type coax cable to the antennas location.