User Manual

Table Of Contents

98-2550 Rev AE

Gridstream SCADA/DA S5SBR

Quick Start Guide Landis+Gyr

2 CONFIGURING AND TESTING

2.1 Connecting to a Gridstream S5 SBR Using Radio Shop

Connect the LAN Connect the LAN Packet Protocol port of your Gridstream S4SBR to your

computer's serial port using the USB cable. Once the Gridstream S5 SBR is powered up, you can

launch RadioShop on your computer. RadioShop will now connect to your local Gridstream S5

SBR card.

1. On the RadioShop home screen, click Discover | Force Scan and Discover Entry Ports.

NOTE: When the Select COM Ports for Discovery window opens, select the COM port on

your computer that is connected to the Gridstream S5 SBR, and then click OK.

Figure 2 - 1. Connecting to a Head-end Radio

Once connected, the local radio's LAN address will appear on the list at the top left-hand

side of the screen, and the radio configuration will be displayed in the main window

(Figure 2 - 1). This radio can now be used to communicate with the Gridstream S5 SBR

and configure it as needed.