User Manual
Table Of Contents
- Chapter 1: Product Overview 1
- Chapter 2: Configuration & Testing 19
- Chapter 3: Development Environment 27
- Product Overview
- Introduction
- Performance Specifications
- Electrical Interface
- Pin Functions
- Pin 1 (VIN)
- Pin 2 (LPP TX) and Pin 3 (LPP RX)
- Pin 4 (DIGITAL_IO1) and Pin 11 (DIGITAL_IO2)
- Pin 5 (ANALOG_IN1) and Pin 10 (ANALOG_IN2)
- Pins 6 and 7 (GND)
- Pin 8 (LOW_RF_POWER)
- Pin 9 (PWR_DN)
- Pin 12 (TPP RX) and Pin 13 (TPP TX)
- Pin 14 (3.3V_Logic_supply)
- USB Programming Cable
- USB Cable Installation
- Antennas
- External Antenna
- On-board Antenna
- Additional Specifications
- Dimensions: Gridstream S4SBR 25-1681 / 25-1682
- Dimensions: Gridstream S4SBR 25-1683 / 25-1684
- Configuration & Testing
- Development Environment
- Gridstream SCADA/DA Series 4 Single Board Radio Interface Board
- Transparent Port (TPP) Connection
- LAN Packet Port (LPP) Connection
- Onboard Regulator
- Digital Input
- Analog Input
- General Usage Instruction
- Gridstream S4SBR Logic
- Control Register 1
- Control Register 2
- Digital I/O Functionality
- Analog Input Functionality
- Memory Location
- Manufacturer Contact Information
- External Antenna Specifications
- Ground Plane Specifications
- RF External Antenna Cable Specifications
- External Antenna Radiation Pattern
- Identifying a Reverse-Polarity Connector
- Specifications
- On-board Antenna Radiation Pattern
- FCC Class B
- RF Exposure
- Industry Canada
- Host FCC Label Requirement
- Data Sheets
- Whip Antenna P/N 16-1000-0
- RF External Antenna Cable P/N 21-1000-0
1
Gridstream SCADA/DA S4SBR 98-1138 Rev AD 1
Product Overview
Introduction
The Gridstream SCADA Series 4 Single Board Radio (Gridstream S4SBR) is for use by OEM
vendors wanting to incorporate Gridstream capability into their SCADA/DA and similar products.
The design of the board allows integration with an OEM enclosure and communication with the
customer's equipment via a 14-pin connector. Table 1 - 4, "I/O Connector Pin Functions and
Acceptable Voltage Levels," provides details for the interface. The Gridstream S4SBR is available
in four unique versions, listed/numbered below and in the following illustration:
1. External Antenna (MCX connector), without Super Cap, Part number 40-1681
2. External Antenna (MCX connector), with Super Cap, Part number 40-1682
3. Internal Antenna, without Super Cap, Part number 40-1683
4. Internal Antenna, with Super Cap, Part number 40-1684
The Gridstream S4SBR is a self-contained 600 mW Integrated WanGate Radio (IWR) which
includes voltage regulation, micro-processor, and radio. Output power can be set to 100, 450, or 600
mW.
Figure 1 - 1. Gridstream S4SBR Internal and External Antenna Versions
3 4
1
2
draft 29 Jan 2013