User's Manual

Landis+Gyr Chapter 2 - Configuration & Testing
UtiliNet SCADA Single Board Radio 98-1546 Rev AA 25
Troubleshooting
The UtiliNet SBR has been designed as a Field Replaceable Unit. As such, there are no serviceable
parts in the unit.
If you suspect parts within the UtiliNet SBR have failed:
1. Perform a visual inspection to determine if there is any visual indications of damage to the unit.
2. Verify that AC power is being supplied to the unit. If there is power then proceed to step 3.
3. Try to connect with a locally connected Series III IWR configured the same as the UtiliNet SBR.
If after 5 minutes, the locally connected Series III IWR does not acquire the UtiliNet SBR in its
neighbors list, the UtiliNet SBR should be replaced.
For additional assistance for this product, contact Technical Support toll-free at 1-888-390-5733 or
[e-mail].