User's Manual

Landis+Gyr Chapter 2 - Configuration & Testing
UtiliNet SCADA Single Board Radio 98-1546 Rev AA 23
The Final Confirmation dialog is displayed.
4. Click Next to create the Network ID for the radio. A confirmation message verifies that the new
Network ID has been assigned to the radio.
Adding New Radios to RadioShop
You can now add the UtiliNet SBR to the RadioShop database.
1. Make sure your local radio is highlighted on the Nodes Pane.
2. Click Generate WAN Nodes Report.
3. From RadioShop home click Utilities > Radio > Discover Neighbors. See Figure 2 - 7.
Figure 2 - 7. Discovering Neighbors
4. Once discovered, the UtiliNet SBR’s LAN Address will show up on the Nodes pane, as shown
in Figure 2 - 8.
Do not use spaces in the Name field.