User's Manual

2
UtiliNet SCADA Single Board Radio 98-1546 Rev AA 19
Configuration & Testing
Overview
The UtiliNet SCADA Single Board Radio is configured using the RadioShop 4.0 (or later) program
only. Setup is similar to setting up and configuring any UtiliNet Radio.
Refer to the RadioShop 4.0 Getting Started Guide for further details about configuring the UtiliNet
SBR.
Connecting to a Radio using RadioShop 4.0
Connect the LAN Packet Protocol port of your IWR to your computer's serial port using a serial
cable. Once the radio is powered up, you can launch RadioShop 4.0 on your computer. RadioShop
will now connect to your local UtiliNet SBR card.
1. From RadioShop home select the Head-End Mgmt tab.
2. Click Discover>Force Scan and Discover Entry Ports.
RadioShop version number is subject to change. Refer to the latest version of the RadioShop
Programming Guide for additional detail.
When the Select COM Ports for Discovery window opens, select the COM port on your
computer that is connected to the radio, and then click OK.