User's Manual

UtiliNet® Endpoint User Guide 11-1-2006
Page 14 of 30
© Cellnet 2005
Adding new Radios to RadioShop
You will now need to add the meter radios to the RadioShop database. This is be done by
invoking the automatic discovery feature from the Radioshop main menu. Make sure your local
radio is highlighted in the network view and select Utilities>>Radio>>Discover Neighbors from
the RadioShop main menu. This will automatically populate RadioShop’s database with all
required information about the integrated meter module in order to establish over-the-air
communication. All visible UtiliNet radio modules will be automatically added to the network
view in RadioShop.
Communicating with integrated meter modules
In order to address a remote endpoint that has not been configured with a Latitude/Longitude you
must select the endpoint “via” your local radio. This tells the network what path to take to reach
the endpoint, which does not yet have a valid Latitude/Longitude. To select your endpoint “via”
your local radio, right click on the endpoint and select “Select Via…” from the context menu.
Once selected via, the text displayed in the network view should indicate that the remote endpoint
is selected via your local radio.