Installation Guide

Landis+Gyr Appendix A - Crimping Wires
CWE 6060 Remote Installation Guide 98-1551 23
5ForspliceconnectionsoutsidetheCWERemoteenclosure,inserttheentirespliceassemblyinto
thesilicone‐filledspliceenclosure.Closethecoverandpositiontheleadstoexitalternatesides
Figure A - 5. Inserting splice assembly into silicone-filled splice enclosure
Cellnet strongly recommends a splice enclosure. Failure to use a splice enclosure
may invalidate the manufacturer’s warranty.
The 3M Gel splice connector is NOT reusable. Replace the splice if necessary.