Installation Guide
A
CWE 6060 Remote Installation Guide 98-1551 21
Crimping Wires
Use this process to crimp wires for the Cellnet Water Endpoint.
Crimping Wires
1StripthewiresthataretobeconnectedandpushthestrippedwiresintotheScotchlokconnector
asfaraspossible.
Figure A - 1. Stripped wires pushed into Scotchlok connector
2PlacetheScotchlokconnector(withwires)intothejawsofthecrimpingtool.
Figure A - 2. ScotchLok connector in crimping tool jaws
Always use 3M Parallel Jaw Crimping Tool 3M Model E-9Y or equivalent.