Installation Guide

4
CWE 6060 Remote Installation Guide 98-1551 17
Endpoint Replacement
Use the HandHeld and Cellnet Remote Water Endpoint Programming Cable to deactivate all CWEs
prior to leaving the worksite. The handheld prompts you to deactivate while processing the work
order.
1OpenthefaceoftheCWERemote.
2Writedownthecolortranslation.
3Carefullycut anytiewraps.
4CutoffScotchloksnearthecrimp.
5 UnmounttheCWERemote.
Refer to "Identifying the Register for Installation" on page -7.