Installation Guide

Chapter 2 - Installing the Cellnet Water Endpoint Landis+Gyr
10 98-1552 CWE 6060 Remote Installation Guide
10 Matchthecolorscarefullyusingthefollowingtable
.
11 SeeAppendixA,CrimpingWires,for instructionsoncrimpingthewires.
12 DresswiresinsidetheCWERemoteenclosureasshown.
13 ProceedtoTestingtheEndpoint.
Table 1 Color Matching
Encoder Register 6060 Wire Color/Encoder Terminal
kÉéíìåÉ=mêçoÉ~Ç=E^o_=sfF
Blk/Green Green/R Red/B
pÉåëìë=b`oJffI=b`oJfff=Ef`bF
Blk/Blk Green/G Red/R
^j`l=pÅ~åÅçÇÉê
Blk/Blk Green/G Red/R
All color translations will be done at the CWE Remote. If using existing wire, verify that
no color translations are present. If color translations have occurred, replace the
splices if possible. Replace the cable to prevent confusion due to double translation.