Installation Guide

2
CWE 6060 Remote Installation Guide 98-1552 7
Installing the Cellnet Water
Endpoint
Locating the CWE
The CWE Remote should be mounted above ground. If there is an existing touchpad or remote, then
put the new remote in that location. It is preferred to mount the CWE outdoors, to a wall facing the
nearest concentrator.
Mounting the CWE
Mounting techniques vary widely, depending on the physical characteristics of the customer site.
The mounting technique used is left to the installer’s best judgement and experience.
Identifying the Register for Installation
Register connecting instructions listed by register type:
• If the register has screw terminals, proceed to "Connecting a Neptune Auto, Sensus Encoder, or
AMCO Scancoder Register with Screw Terminals" on page -8