User Manual

4
Figure 2. I210+c module, top side with shield lids installed
Figure 3. I210+c module, backside
PCB F trace antenna is designed as part of the I210+c host board for the Zigbee and SM-
MCM0 radios, see the picture below. Refer to the 24-2468 PCB design file for the specific
dimensional details. Each transmitter is certified with the intended trace antenna on the host
board.
Figure 4. Antennas
The I210+c module is designed to be mounted inside of the Aclara I-210+c meter forms
specified in the table below, as final host. The module is mount inside of the meter as shown in
the picture below. See Aclara 119379-INS document for interface specifications.
Zigbee
S5-MCM0
Zigbee
Antenna
S5-MCM0
Antenna