User Manual

Endpoint Quick Start Guide Landis+Gyr
4 98-2412 Rev AA Quick Start Guide
features Digital Multiplication Measurement Technique, meets ANSI standards for performance and
utilizes ANSI C12.19 protocol.
Contact your Landis+Gyr distributors for documentation and details on programming the FOCUS
AXe meter.
About the LAN ID
The LAN ID is a unique identifier for each Landis+Gyr endpoint and it is always displayed in hex
values. Landis+Gyr provides the LAN address. You cannot change the LAN ID of an endpoint.
Labels
The endpoint includes the following labels:
Figure 1 - 2. Label Identification
Host FCC Label Requirements
The host label(s) must be clearly visible after the device is installed, and display the module FCC ID
in the following format:
The following statement must also be clearly visible:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi-
tions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause unde-
sired operation.
Demand (TOU Capable)
• Peak demand
• kWh, and kW demand (TOU capable)
• Bi-directional measurement
• Remote disconnect and reconnect capabilities on the FOCUS AXe Service Disconnect meter
• Display and registers powered with disconnect switch in the open position
• Detects, logs and reports program or memory failure
Contains FCC ID: R7PEG1R1S6
Contains IC: 5294A-EG1R1S6
Draft 10/7/2015