User's Manual

`çããÉêÅá~ä=~åÇ=fåÇìëíêá~ä=jÉíÉê=jçÇìäÉ=fåëí~ää~ íáçå
`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ SJNN
9 AssembletheMeterModulehalvestogetherwiththefoursmallself‐tapping
screwsprovided.Thetorquerequirementis6‐10inchpounds.Ensurethatthe
gasketisinplaceandthewiresarenotpinched.Installthetamperseals.
10 Installthenewindexcover.Gentlyslidethecoverovertheindextoav
oid
breakingth
ecounter.Becarefulnottodamagethedials.Ensurethatthe
counterandindexesareproperlyaligned.Verifythatthecounterisfully
engagedtotheindexpointers.
Figure 6.18 Rockwell/Equimeter/Sensus: meter module installing Index cover
11 AttachthecoverandMeterModuletothemeter. Positionthemodule
bracketoverthecoverandalignthescrewholes.Thetorquerequirementis
30‐40inchpounds.
Figure 6.19 Rockwell/Equimeter/Sensus: securing index cover & Meter Module
Check condition of the index for looseness of index pointers on shaft, cracks on face
enamel, or peeling. Replace the index if dials are loose or bound up, or if enamel is cracked
or loose.