User's Manual

oÉëáÇÉåíá~ä=jÉíÉê=jçÇìäÉ=oÉíêçÑáí
RJNO `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ
7UsethefourremainingscrewstoinstallthecovertotheMeterModulebase,
tighteningthescrewsuntilthecoversitssnug,thentightenanadditional
quarterturn.
Figure 5.22 Rockwell/Equimeter/Sensus: Installing the Meter Module cover

You can mount an Equimeter module to a Rockwell/Equimeter Residential Gas meter using
only two screws, as long as you use one of the following configurations (based on the
image below): A-D, B-C, or A-B. If screws cannot be properly installed, replace with
threaded inserts and 8-32 scews.
Figure 5.23 Rockwell/Equimeter/Sensus: two-screw configuration
Configurations C-D, B-D, and A-C are unacceptable. These are not strong enough to
exclude rainwater.