Installation Guide Part 2

d~ë=jÉíÉê=mêÉé~ê~íáçå=mêçÖê~ã=EdmêÉé F
VJNQ `ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ
MODULE INSPECTION
Thisfeatureismostcommonlyusedwhenreceivingmetersfromthefactorywith
Cellnetmodulesalreadyinstalled(OEMMeters)orwhenreceivingCellnet
modulesfromCellnet’smanufacturer.Differentutilitiesusedifferentsampling
procedures.Cellnetrecommendsthatthemetershopverifya percentageof
inboundmodulestoensurethattheLANAddresstha
tispr
ogrammedintothe
modulematchestheLANAddressontheoutsideofthemodulehousing.The
modulescanalsobeinspectedtoverifythatthecorrectMeterIDformatwas
used,thattherolloverpointiscorrect,andthatthemeterconstantiscorrect.
1SelectInspectfromtheModedropdo
wnwindowinthema
inmenu.The
followingscreendisplays.
Figure 9.8 GPrep “Inspect Mode” screen
Therearetwodistinctsectionsonthescreen.ThetopsectionistheLANAddress
fieldwherethemodulepowerLANlabeliseitherscannedortyped.
Different modes of operation for ResGas modules are provided in detail. All other meter/
module types follows the identical functionality and operations, except as noted for Water
CPR.
The program automatically truncates the leading zeros and any blank spaces in the LAN
Address field. GPrep left justifies the value in this field.