User Manual

Table Of Contents
Landis+Gyr Chapter 1 - Pre-Installation
Installation Guide 98-1135 Rev AE 21
Rotary Required Materials
For rotary meters a cable, GPR, and bracket kit are needed (for GE rotary kit, reference manual 98-
1693).
Cable
Select one based on meter type and its interface.
GPR
Bracket Kit
NOTE: Tie wrap 22-1417 is needed to tie the cables and is not included in kit.
NOTE: For wall mount installations, 45-2478 is not needed.
Table 1-14. Rotary Gas Meter Module Installation Tool List
Torx Pin Head Driver, T10 Flat-tip Screwdriver, 1/4 inch x 5 inch
Torx Pin Head Driver, T15
Wire Cutter\Stripper for 19-26-AWG solid
conductor wire
Flat-tip Screwdriver, 3/16 inch x 4 inch Badger Field Splice Kit 62084-001
Torque Driver \ Wrench, 0.5 inch-pounds to 20 foot-
pounds
3M Scotchlok E-9Y Crimping Tool or Equivalent
Phillips Screwdriver, #2 3M Scotchlok, Model UY2 or Equivalent
Table 1-15. GPR Rotary Meter Cables
Part # Description
19-2330 Cable Assembly, Flying Leads, Single Output, Gas C&I 2-Way
19-2331 Cable Assy, Rotary, Flying Leads, Double Output, Gas C&I 2-Way
19-2332 Cable Assy, Rotary, Gas C&I 2-Way (w/ circular Military connector)
Table 1-16. GPR Installation Components for Rotary Gas Meters
Part # Description
40-1672 Assy, 2-Way C&I Gas Module
Table 1-17. GPR Pipe Mounting Hardware.
Part # Description
45-2478 GPR Pipe Mount Kit, 1-3 Inch (see NOTES below)
22-1417 TIE WRAP, 10 inch, UV, NYLON, BLACK (see NOTES below)