User Manual

Table Of Contents
Landis+Gyr Chapter 1 - Pre-Installation
Installation Guide 98-1135 Rev AE 11
Required Parts
For diaphragm meters, an index cover kit, a dial wheel, and a GPR brackets kit are needed for
each meter. (Three part numbers should be ordered for each meter installation).
American Meters Required Materials
Index Cover Kits (Choose One)
Select one Index Cover Kit based on index type or meter size.
NOTE: American Gasket (28-1473) is included in index cover kits.
Dial Wheels (Choose One)
Select one dial wheel based on index type. Shim is needed for either selection.
Figure 1 - 3. Mini Switch Kit for Plastic Index (40-2475)
Table 1-2. American Meter Index Cover Mini Switch Kits
Description
Part
Number
Figure
Number
Index Cover Assy, Am AL800, 2-Way SSP (for 5ft & 10ft index) 40-2474 Figure 1 - 4
Index Cover Assy, AL800 100ft, 2-Way SSP (for 100ft index) 40-2475 Figure 1 - 3
Index Cover Assy, Am Res AL425 2-Way SSP (for Residential size meters) 40-2473
Table 1-3. American Large Diaphragm Meter Dial Wheels
Description
Part
Number
A Dial Wheel, Balanced, C+I, Epoxy (for Plastic dial hand) 40-1538
B Dial Wheel, Index Face Mount, Epoxy (for Metal dial hand) 40-1742
C 0.030” Shim, Dial Wheel, Orange, Polyester (see NOTE below) 29-1300
A