User Manual

Appendix A - GPR2-PT Waterproofing Landis+Gyr
26 98-1678 Rev AA Installation Guide
Figure A - 6. The Compound Must Cover Wires and Connectors for Watertight Seal
6. Arrange the GPR2-PT serial and battery interface cables as shown in Figure A - 7. The cables
must not interfere with or block the GPR2-PT antenna.
A CAUTION: The GPR2-PT serial cable must be inserted into the GPR2-PT enclosure strain
relief slot as shown.
 NOTE: Battery should not be connected until GPR2-PT is fully mounted.
7. Gently press the cable downward into the strain relief slot as shown in the following figures.
Figure A - 7. Arrange Cables As Shown Before Installing the GPR2-PT Cover