User Manual

Chapter 2 - GPR2-PT Mounting Instructions Landis+Gyr
20 98-1678 Rev AA Installation Guide
Figure 2 - 18. Mercury Connections
To establish a communication between Corrector and GPR2-PT board, all wires should be connected
as described in the diagram from PT board. Mercury's Protocol Translator Configuration software is
required to start communication with Corrector from Laptop/PC. Specific MODBUS configuration
required to initiate communication between Corrector (PT board) and GPR2-PT board.
Eagle Corrector (XARTU)
Figure 2 - 19. Eagle Connections Diagram