User Manual

Chapter 2 - GPR2-PT Mounting Instructions Landis+Gyr
12 98-1678 Rev AA Installation Guide
Figure 2 - 5. GPR2-PT/Bracket Assembly for Vertical Pipe Installation
3. Route the serial cable along the most direct and convenient route between the Meter and the
GPR2-PT (preferably along the pipe). Secure the serial cable to the pipe with black nylon UV-
rated tie wraps in locations along the pipe 12" apart.
4. Connect the cable to the EVC using the model-specific instructions below for Eagle or Mercury
EVCs.
U WARNING: Refer to the meter and EVC manufacturers' instructions and warnings on
electrical wiring and electrostatic discharge. Local electrical codes must be followed when
wiring AMR devices in a gas metering environment.