User Manual

Table Of Contents
Chapter 5 - Schlumberger GPR Index Cover & GPR Install Landis+Gyr
66 98-1135 Rev AB Installation Guide
Figure 5 - 19. GPR and Index Cover Assembly Installed On a Schlumberger Large Diaphragm
Meter
U WARNING: The index cover switch cable assembly must not be pinched in any way,
especially under the following circumstances:
During index cover and cable assembly installation onto the meter.
During GPR enclosure cover installation.
Between the GPR and meter brackets and meter.
Schlumberger Changing GPR Orientation
The GPR must face away from nearby walls and toward the nearest MCC or Concentrator. The GPR
should be installed in a location unobstructed by gas pipes. Different mounting options are shown in
the following photographs. Choose mounting option before attaching battery and GPR cover.
Figure 5 - 20. GPR Facing Left