User Manual
Table Of Contents
- 15-0028 - Exhibit Cover.pdf
- Elster A3 User Guide 98-1671.pdf
- Endpoint Overview
- Command Center Deployment/Configuration
- Deployment
- Tracking and Deployment
- Endpoint Configuration
- HAN Setup Process Overview
- HAN: Initialization
- Provisioning HAN Devices
- Remove HAN Devices
- Management and Troubleshooting
- Meter Swap Out Process using Decommission HAN
- Commission HAN Network for Channel Control
- Meter LCD Screen for ZigBee Alerts
- Confirm HAN Radio in Meter is Communicating or HAN is set-up
- Get information for a specific device
- Get Firmware version for the HAN radio
- Confirm that a HAN device can communicate with the meter
- Using Endpoint Testing Manager (ETM)
- Specifications
Landis+Gyr Chapter 3 - Using Endpoint Testing Manager (ETM)
User Guide 98-1671 Rev AA 69
NOTE: Some test interval options do not apply to all command choices
HAN Tab
The HAN (Home Area Network) tab makes use of ZigBee protocols to enable home user interaction
with power managing and monitoring devices. When connected to a compatible endpoint, Endpoint
Testing Manager accesses the following ZigBee functions:
• Access and display ZigBee network information
• Enable registration into an active Home Area Network
• Remove an active Home Area Network
Additional associated functions and data are available on this screen, including displays for Zigbee
Network Channel and HAN ID. A data field on this screen displays the HAN Device List. Near this
data field are buttons to Get Device Details and Delete HAN Device.
Sub-tabs on the HAN tab provide options for the user to check Device Provisioning, supervise Load
Control, view Event History, manage Messaging, coordinate Troubleshooting, and run a FAT Test.
The MAC Address of the HAN (Home Area Network) module is displayed on the HAN tab, along
with a button immediately adjoining the display that provides a means to Get Device Details.
Table 3 - 11. HAN Tab
Field Description
Zigbee Network Details
Channel:
Displays the channel that ZigBee is currently using. This number will be
between 11 and 25.
HAN ID:
Displays the Network ID that ZigBee is currently using. The number will be
between 1 and 65334.
Commands and Displays
Network Info <button> Sends a request to the network for ZigBee Network Information.
Commission HAN <button> Creates the ZigBee (HAN) network.
Decommission HAN
<button>
Closes the active ZigBee (HAN) network.
Refresh HAN Device List
<button>
Displays an updated list of ZigBee devices that currently exist on the HAN
network.
Get Device Details <button>
Queries the highlighted HAN device for configuration parameters and
displays the information in the Activity Log window.
Delete HAN Device
<button>
Deletes the highlighted HAN device.
MAC Address Displays the MAC address of the Home Area Network module.
Device Class
Defined in the ZigBee Smart Energy Profile Specification and refers to
particular devices, e.g. Range Extenders, Metering Devices, Smart
Appliances, etc.