User Manual
Table Of Contents
- 15-0028 - Exhibit Cover.pdf
- Elster A3 User Guide 98-1671.pdf
- Endpoint Overview
- Command Center Deployment/Configuration
- Deployment
- Tracking and Deployment
- Endpoint Configuration
- HAN Setup Process Overview
- HAN: Initialization
- Provisioning HAN Devices
- Remove HAN Devices
- Management and Troubleshooting
- Meter Swap Out Process using Decommission HAN
- Commission HAN Network for Channel Control
- Meter LCD Screen for ZigBee Alerts
- Confirm HAN Radio in Meter is Communicating or HAN is set-up
- Get information for a specific device
- Get Firmware version for the HAN radio
- Confirm that a HAN device can communicate with the meter
- Using Endpoint Testing Manager (ETM)
- Specifications
Landis+Gyr Chapter 3 - Using Endpoint Testing Manager (ETM)
User Guide 98-1671 Rev AA 57
Figure 3 - 24. Settings.XML File Detail
Editing Multiple Meter Test Configuration
Figure 3 - 25. Accessing Multiple Meter Test Configuration
Figure 3 - 26. Edit Multiple Meter Test Configuration Dialog
The Edit Multiple Meter Mode Test Configuration dialog allows users to select the fields that will
appear on the Multiple Device Test Results screen. The Edit Multiple Meter Mode Test
Configuration dialog also supports data filtering by allowing users to specify values to test against
for a selected field.