User Manual

Landis+Gyr Chapter 3 - Using Endpoint Testing Manager (ETM)
User Guide 98-1671 Rev AA 39
Following is the procedure for selecting an alternate server:
From the ETM log-in screen, select the Select a new server link. The Server List window will
appear.
• Click the name of the desired server in the Server column.
• Click Select. The Server List window will close and if ETM can connect to that server, the
selected server will be displayed on the ETM login screen.
Modify an existing server
If it is necessary to make modifications to an existing server, this task may be performed in the
Server List window, shown previously in Figure 3 - 2.
From the ETM log-in screen, click the Select a new server link. In the Server List window, click the
name of the server to be modified.
• Select the Modify button. The New Server window will open.
• Make desired changes.
• Click Save to apply changes.
• Click Close to close the Server List window and return to the ETM login screen.
Delete an existing server
If it is necessary to delete an existing server, this task may be performed in the Server List window.
In the Server List window, click the name of the server to be deleted.
• Select the Delete button. The selected server will be removed from the Server List.
• Click Close to close the Server List window and return to the ETM login screen.
Add additional servers
If it is necessary to add additional servers, this task may be performed in the Server List window.
In the Server List window, click the Add button. The New Server window will open.
• Server Nickname: Enter a user-defined name for this server.
• Server Location: Enter the physical location of the server.
• Server FQDN: Enter the fully qualified domain name for the server. (see example in the
New Server display)
• Make this my default Authentication Server. Enable this setting to connect to this server
each time this instance of ETM starts.
• Click Submit to add the new server.
• Click Close to close the Server List window and return to the ETM login screen.