User Manual

Chapter 2 - Command Center Deployment/Configuration Landis+Gyr
32 98-1671 Rev AA User Guide
Figure 2 - 22. HAN Tab
...or...
2. On the Endpoint Information Window, select the Manage Tab.
Figure 2 - 23. Manage Tab
A. Enter the MAC Address. (Listed either on the HAN device or HAN device packaging.)
 NOTE: A Media Access Control address (MAC address) is a unique identifier assigned to most
network adapters or network interface cards (NICs) by the manufacturer for identification.
B. Enter the Install Code. (Listed either on the HAN device or HAN device packaging)
C. Click the Send button. This will notify the Meter to open a Join Window for the specified
HAN device.
 NOTE: The window of time during which the customer may complete registration is determined by
the user configuration setting in the Organization Information screen and must be set to a value of
between 1 to 30 days.
3. The HAN or Manage Tab will be updated with a device status of Provision Request, which
indicates that the Meter has opened a Join Window for the specified device. The MAC Address
and Install Code for the specified device will be shown in the updated window as well.
Figure 2 - 24. MAC Address
4. Once initial contact with the specified device has been made, the device status will update to
Find Pending.
 NOTE: You may need to click the Refresh icon periodically to determine if the device has entered
the Find Pending status.