User Manual

Table Of Contents
Landis+Gyr Chapter 17 - Sprague GPR-P Index Cover & GPR Install
Installation Guide 98-1135 Rev AA 97
Figure 17 - 10. Gap Must Be Visible Between Wheel and Switch
13. Install tamper seals into the tamper cups as shown in Figure 17 - 11.
Figure 17 - 11. GPR Assembly installed on a Sprague Large Diaphragm Meter
U WARNING: Take care not to pinch the index cover switch cable assembly in any way,
especially during the following installation steps:
During index cover and cable assembly installation onto the meter.
During GPR enclosure cover installation.
Between the GPR and meter brackets and meter.