User Manual

Table Of Contents
5
Installation Guide 98-1135 Rev AA 35
Sprague Index Cover & Gas
Module Removal
Figure 5 - 1. Typical Sprague Large Diaphragm Gas Meters
Meter Preparation
1. Remove the tamper seals, screws, and index cover assembly from the meter.
2. If a Commercial Gas Module is present, remove the tamper seals and screws.
Figure 5 - 2. Sprague Large Diaphragm Meter with Commercial Gas Module
3. Remove the bracket and Index Cover assembly. Take care not to damage the meter index.
Tamper Seal
Tamper Seal