User Manual

Table Of Contents
Landis+Gyr Chapter 4 - Schlumberger Index Cover & Gas Module Removal
Installation Guide 98-1135 Rev AA 33
Figure 4 - 4. Index Removed from Unsupported Bracket Assembly
Supported Mounting Bracket Assembly
The index mounting bracket assembly shown in the next two figures, Itron (Schlumberger/Actaris)
part# 55045404, is supported with the Solid State Pulser index cover.
A. Remove the index mounting bracket assembly screws as shown in the following figure (red
circles). Save the index screws. They will be used during reassembly.
Figure 4 - 5. Rear View of Supported Index Mounting Bracket Assembly
Figure 4 - 6. Front View of Supported Index Bracket with Index Removed
A CAUTION: For illustrative purposes, the index has been removed from the mounting bracket
assembly in Figure 4 - 6. During on-site installations, DO NOT remove the index from this type