User Manual

Table Of Contents
Appendix A - American Changing GPR Orientation Landis+Gyr
100 98-1135 Rev AA Installation Guide
Figure A - 3. GPR at C enter Rear - Using 28-1441Bracket
Figure A - 4. GPR at Center Rear - Using 28-1423 Bracket
1. Lay the GPR face down. Remove the two screws and washers holding the two brackets together
as shown in Figure A - 5.
Figure A - 5. GPR Bracket Disassembly
2. Determine the appropriate GPR direction.
3. Install the two screws and lock washers. Tighten the screws to 30 inch-pounds (+/- 2 inch-
pounds).