User Manual

Landis+Gyr
Chapter 7 - Routers in Command Center
Network Concentrator User and Installation Guide 98-1013 Rev AF 88
Figure 7 - 6. Remove Endpoint From Service
5. Enter Removed Electric Meter Information:
A. Enter the Final kWh Reading (Optional)
B. Enter the Final Reading Date (Optional)
C. Enter Removed Endpoint Information. Select a reason for the removal from the drop
down list box.
D. Awaiting Redeployment. This option will transition the endpoint to Inventory status.
E. Permanently Remove From Service. This option will archive the endpoint. An endpoint in
archived status will not be included in any Command Center reports.
6. Click Save to save changes. A message indicating the success or failure of the removal will be
displayed.