User Manual

Landis+Gyr
Chapter 7 - Routers in Command Center
Network Concentrator User and Installation Guide 98-1013 Rev AF 87
RF Network Settings
The RF Network Settings establish organization level settings for outage wait values, time
synchronization, etc. The RF Network Settings are a part of the endpoint configuration and may only
be changed by Landis+Gyr technical support.
Command Center Operation
Router
This function allows the user to remove a deployed router from service. The removed router can
either be put back into inventory or archived.
1. From Command Center, select Operations > Endpoints. The Endpoint/Meter Selection
window will open.
2. Enter the Meter Number of the existing meter.
3. Click GO. The Available Tasks list will appear. This list will vary based on model of the meter.
Figure 7 - 5. Endpoint/Meter Selection Available RFS Focus Tasks
4. From the Available Tasks, select the Remove Endpoint from Service link. The Remove
Endpoint From Service window will open, shown in Figure 7 - 6.