User Manual

Table Of Contents

Landis+Gyr

Chapter 7 - Routers in Command Center

Network Concentrator User and Installation Guide 98-1013 Rev AF 86

Time Zone

In order to report readings time correctly, the router must be programmed with the appropriate time

zone. This is achieved by sending commands to the router that indicates the time zone in which the

endpoint is installed and whether Daylight Savings Time (DST) is observed in the given time zone.

The meter installer should include the endpoint time zone in the Installation File. To make it easy for

installers to specify a time zone, the Time Zone List link will open a document that displays a list of

valid time zone designations by country.

1. From Command Center home, select Operations > Import > Import Installation File.

The Import Installation File window will open.

Figure

7 - 3.

Import Installation File Window

2. Click on the Time Zone List Link. The

TimeZonesForInstallation

window will open.

Figure

7 - 4.

Time Zone List

3. Note the correct Time Zone Value for your IIF.