User Manual

Network Concentrator User and Installation Guide 98-1013 Rev AF 84
7
Routers in Command Center
Importing Routers into Command Center
The following section describes the process of manually importing Routers into Command Center.
The minimum data set required to successfully import the Router into Command Center includes:
Wan ID, User ID, Installation Date, Installation Time, Installed Meter No, Installed Endpoint SN,
and Service Time Zone.
Generating the Import Installation File (IIF)
The IIF is always required, even if using Router Auto Registration. When a Router has been
physically installed in the field, certain data must be reported back to the Command Center staff in
order to generate the IIF.
Create a CSV File for the IIF Information
Command Center can generate a template IIF (in CSV format).
1. From Command Center home, select Operations > Import > Import Installation File.
The Import Installation File window will open.
Figure 7 - 1. Import Installation Window
2. Click the CSV Template link.
3. Select Save and designate the file location.
4. Open up the saved.CSV file with Microsoft Excel.
5. Fill in the columns with the appropriate data. Each row in the document represents one router (or
Endpoint) and should only contain data related to that specific unit.