User Manual

Landis+Gyr
Chapter 6 - Performing System Upgrad es
Network Concentrator User and Installation Guide 98-1013 Rev AF 81
Testing the Concentrator
Test the concentrator to verify that it has been programmed correctly.
1. Unplug the ethernet cable from the router.
2. In the Diagnostics menu, type b to reboot the concentrator system.
Figure 6 - 31. Diagnostic Menu
3. Hyperterminal reboot
If the Diagnostics Menu does not display, then start over again from the fir s t
step in this se ctio n.
4. Type y to Yes, reset the system.Wait for the system to boot into normal operation.
Figure 6 - 32. Hyperterminal rebooting message
5. Type i to display firmware version information.