User Manual

Network Concentrator User and Installation Guide 98-1013 Rev AF 50
5
RF Filter and Battery
Replacement Kits
You can retrofit a concentrator with an RF Filter anytime. This chapter outlines the parts and
procedure to perform this task. It also outlines the battery replacement kit and procedure.
Enable/Disable RF Filter
When an optional RF filter has been included for reducing interference, the filter can be enabled or
disabled in the field by qualified personnel using RadioShop 4.1.
1. Verify that the Router is highlighted on the Nodes Pane.
2. Right-click the Router ID.
3. Select Enable RF Filter from the pop-up menu.
To Disable the RF Filter
Figure 5 - 1. Enable (or Disable) the RF Filter
4. Right-click the Router ID.
5. Select Disable RF Filter from the pop-up menu.