User Manual

Landis+Gyr
Chapter 3 - Field Configur a t ion
Network Concentrator User and Installation Guide 98-1013 Rev AF 23
19. Type q for quit.
20. Type y for yes.
Figure 3 - 10. Type “q” For Quit
Figure 3 - 11. Rebooting the concentrator via Hyperterminal
21. After the concentrator resets, close Hyperterminal.
22. Unplug the cable marked “Console” from COM 1.
23. Plug the Lan Protocol cable into COM 1.
If you disconnect the power cables before the programming cable, the unit uses
battery backup. This depletes the battery and can affect r o u t in g.