User Manual

Network Concentrator User and Installation Guide 98-1013 Rev AF 15
3
Field Configuration
Configure the concentrator prior to installation. Steps include:
1. Configure the IWR radio (using Network Configuration Manager).
2. Program the concentrator.
3. Write network settings to the concentrator.
Required Tools
To perform field configuration, you need the following:
• PC with two serial ports or USB-to-serial adapter.
• Concentrator programming Kit 45-1046 (see About Programming and Diagnostic Cables for
more information).
• Network Configuration Manager.
• Hyperterminal (a communications accessory that comes bundled with the Windows Operating
System prior to the Vista release, and available free on-line).