User Manual

Network Concentrator User and Installation Guide 98-1013 Rev AF 119
H
Power Cable Installation
Power Connection and Termination
Figure H - 1. Improper Power Termination
If using the 105704-000, 105704-001, 105704-002, or 105704-003 cables, the
end of the cable opposite the connector (the unterminated end) must be
installed in a junction box or other suitable enclosure. These cables are not
recommended for new installations. See Table 4-1 for suggested parts.
The older version decorative light pole kits use 105704-002 cables. Please
observe standard precautions unless installing with the 19-2273 cables, which
are in the current kits. Use standard procedures when installing 105604-XXX
cables.
If using the 105704-000, 105704-001, 105704-002, or 105704-003 cables, the
end of the cable opposite the connector (the unterminated end) must be
installed in a junction box or other suitable enclosure.