User Manual
Table Of Contents
- 10-0097 - Manual Cover.pdf
- Concentrator Manual 98-1031-1
- Table of Contents
- Preface
- Pre-Installation
- Field Configuration
- Concentrator Installation
- RF Filter Enable/Disable and Battery Replacement Kit
- Performing System Upgrades
- Troubleshooting
- Product Specifications
- Compliance
- Bench Testing
- About Firmware
- About Programming and Diagnostic Cables
- Sample Survey Sheet
- Power Cable Installation
- Glossary
- Index
Chapter 6 - Performing System Upgrades Landis+Gyr
68 98-1031 Rev AA Concentrator User and Installation Guide
B. Type ftp, space, and then the IP address just assigned to your concentrator, for example ftp
192.0.1.10. The command window connects to the CPU board to update the image.bin.
Figure 6 - 19. C:\ prompt
C. Type user root, then the Enter key.The user is case-sensitive.
Figure 6 - 20. C:\root
D. Type password Netsilicon or password, then the Enter key. This password is case-
sensitive.
E. Type bin, then the Enter key.
Skipping this critical step corrupts the image on your concentrator.