User Manual
Table Of Contents
- 10-0097 - Manual Cover.pdf
- Concentrator Manual 98-1031-1
- Table of Contents
- Preface
- Pre-Installation
- Field Configuration
- Concentrator Installation
- RF Filter Enable/Disable and Battery Replacement Kit
- Performing System Upgrades
- Troubleshooting
- Product Specifications
- Compliance
- Bench Testing
- About Firmware
- About Programming and Diagnostic Cables
- Sample Survey Sheet
- Power Cable Installation
- Glossary
- Index
Landis+Gyr Chapter 6 - Performing System Upgrades
Concentrator User and Installation Guide 98-1031 Rev AA 65
B. Type ftp, space, and then the IP address just assigned to your concentrator, in this example
ftp 172.25.113.82. The command window connects to the CPU to update the
rom.bin.
Figure 6 - 13. C:\ prompt
C. Type the user root then the Enter key. The user is case-sensitive.
Figure 6 - 14. C:\ root
D. Type password Netsilicon or password, then the Enter key.This password is case-
sensitive.
E. Type bin, then the Enter key.
Skipping this critical step corrupts the image on your concentrator.