User Manual
Table Of Contents
- 10-0097 - Manual Cover.pdf
- Concentrator Manual 98-1031-1
- Table of Contents
- Preface
- Pre-Installation
- Field Configuration
- Concentrator Installation
- RF Filter Enable/Disable and Battery Replacement Kit
- Performing System Upgrades
- Troubleshooting
- Product Specifications
- Compliance
- Bench Testing
- About Firmware
- About Programming and Diagnostic Cables
- Sample Survey Sheet
- Power Cable Installation
- Glossary
- Index
Landis+Gyr Chapter 4 - Concentrator Installation
Series IV Concentrator U and I Guide 98-1031 Rev AA 37
Metal Pole Installation Procedure
This section describes the light pole installation procedure.
1. Attach the strap mount pole bracket (PN 28-2315) to the pole using steel bands.
Figure 4 - 4. Strap mount pole bracket attached to pole
28-1061
BRKT, MOUNTING, 3
TO 5 IN POLE,
WANGATE S2 BLT3
2
Table 4-6. 45-1050 Kit, Mounting, Light Pole, Concentrator (continued)
Image Part Number Name Quantity
The photos in this section are for illustrative purposes only. In the field, mount
brackets higher on the pole. Use the parts that came in the kit.