User's Manual

1-Way Repeater Setup

97-1077 rev AB Page 6 of 11

PROPRIETARY INFORMATION NOTICE:

THIS DOCUMENT CONTAINS TRADE SECRETS AND CONFIDENTIAL INFORMATION OF CELLNET AND SHALL NOT

BE DUPLICATED IN WHOLE OR IN PART OR USED OR DISCLOSED FOR ANY PURPOSE OTHER THAN THAT

APPROVED BY CELLNET.

Page 6 of 11

f Set all out-of-range items to defaults

F Set out-of-range new items to defaults

S Save EEPROM cache to NAND File

G Get the EEPROM params from Nand

q Quit

Select option (? for menu): s

MCC860 EEPROM Configuration

[Note '*' indicates change requires Warm Boot; '+' requires Hot Boot]

[a] MCC ID (up to 15 characters): INCB011

[b] MCC serial number (up to 16 characters): 1000005

[c]+MCC WAN Stack Type (0=radio, 1=serial DMS, 2=serial MTP, 3=RAM WAN,

4=Tel WAN, 5=IP WAN, 6=FreeWave, 7=

Utilinet) [0..7;default=0]: 0

[d]*MCC DMS Net Address [1..4294967039;default=4294967038]: 600037

[e]*MCC DMS node address (normally 1) [1..65534;default=65534]: 12

[f]+Log manager's (and CTS's) DMS Net Address [1..4294967039;default=4294967039]:

[g]+Log manager's (and CTS's) DMS node address [1..65534;default=65534]: 254

[h]+Event manager's DMS Net Address [1..4294967039;default=4294967039]: 25

[i]+Event manager's DMS node address [1..65534;default=65534]: 256

[j] Event forwarding ODE timeout (seconds) [120..86400;default=1800]: 1800

[k] Event forwarding holdoff (seconds) [0..86400;default=120]: 120

[l]+Last ODE object id [1..2147483647;default=1]: 117350001

[m]*Minutes from GMT (0=GMT, 480=PST) [positive increments of 60] [-

720..720;default=480]: 360

[n]*Daylight savings type (0=none, 1=USA, 7=UK) [0..7;default=1]: 1

[o]+Lan transceiver hardware revision [0..255;default=0]: 0

[p]+Lan Rx squelch [0..255;default=0]: 1

[r]+Lan Rx frequency (3 MHz steps) [905.58..926.58;default=917.58]: 917.58

[s]+Lan Rx chipping sequence [1..6;default=1]: 1

[t]+Lan Rx Trip level (0 = use transceiver default) [0..255;default=0]: 0

[u]+Lan Rx antenna (0=normal, 1=fast, 2=fixed A, 3=fixed B) [0..3;default=0]: 0