User Manual

Landis+Gyr Gridstream RF Electric Endpoint Fix-up Antenna Installation Guide
Landis+Gyr Confidential Information 98-1245 Rev AA 9
6. Install the remote antenna at the location indicated by the link assessment performed. If a link
assessment tool is not available, select a location that provides the best line of sight to the nearest
collector.
7. Once installed to the
antenna, wrap the connector using cold flow tape. Tape should be wrapped
tightly and in a continuous manner. The tape should cover the cable one inch past the end of the
connector.
8. Secure the
cable to the side of the structure using appropriate hardware for the building
construction.
Cable Tie
Align the antenna center point at the 5:00 position with the upper
edge of the antenna 3.3 cm below the top surface of the meter cover
Figure 7. Installation On FOCUS Integrated AX/AX-SD Meters